U.N.C.L.E. Carbine |
|
|
 |
|
 |
|
 |
|
|
U.N.C.L.E. Carbine Disassembled |
 |
|
U.N.C.L.E. Special with Flash Hider |
 |
|
U.N.C.L.E. Special with Rounded Grip |
 |
Close-up of U.N.C.L.E. Special Flash Hider |
 |
|
U.N.C.L.E. Special with Silencer |
 |
|
Close-up of U.N.C.L.E. Special Silencer |
 |
|
Rubber Copy of Original Rounded Grip U.N.C.L.E. Special |
 |
|
 |
|
U.N.C.L.E. Special Conversion of P-38 Airsoft |
 |
|
|
|
|
The First U.N.C.L.E. Special – Made From Mauser Pistol |
 |
|
 |
|
|
Here is the Illya Kuryakin holster after it was cut, resized and stitched back together. Unfortunately, this original holster has since torn into several pieces.
 
Here is another early U.N.C.L.E. holster that became “official.” It is from “The Quadripartite Affair” and later became the Solo holster. It’s lines are only slightly different from the “Kuryakin” holster. Sometimes it appears it might have been made of slightly thicker leather. And originally the backstrap was too short. They used a second “extender” strap to make it longer, as revealed by the two buckles on the backstrap.
  
Before they settled on what we now recognize as the official U.N.C.L.E. shoulder holster, there were several other types that were used. Here are pictures of some of them.
Type of holster used by Napolean Solo in the pilot episode, “The Vulcan Affair”
 
 
Type of holster used by Illya Kuryakin in pilot episode, “The Vulcan Affair”
 
These two are from “The Iowa Scuba Affair” and “The Brain Killer Affair
  
  
If you have always wanted to own an accurate copy of the Man From U.N.C.L.E. gun, but couldn't spend thousands of dollars for it, here is your chance to make your own accurate copy at an affordable price.
The grips below are tough plastic copies of the "rounded" and "flat" grips used on the Man From U.N.C.L.E. TV series. The rounded grip was molded from a 1st generation copy of the original TV gun grip and has been modified and strengthened for use on a P-38 blank gun. The flat grip was molded from one made by someone who owns one of the original U.N.C.L.E. guns and modified to fit the P-38 blank gun. Others have tried to adapt this grip to the blank gun and failed- we succeeded.. The blank gun this grip was made to fit is the model ME38 made by Bruni S.R.L. in Milano Italy. If your P-38 blank gun is this model it should fit perfectly unless there has been some change by the manufacturer in the gun's dimensions or grip hole. Very, very slight modification needs to be done to the gun to install the rounded grip. For the flat grip to fit the handle of the blank gun needs to be ground down. Instructions for fitting grips on the blank gun are included.
I worked with 7 different plastics before settling on the one used in this grip, and even though the grip is very tough and of excellent quality, the stock slot and scope mount slot should be considered cosmetic and not functional. Adding a stock or scope mount might cause the grip to crack or break at those spots if it experiences enough stress. The color of the grip is black...all the way through, and has an excellent finish. They have been lightly polished to simulate the anodized aluminum grips of the original U.N.C.L.E. guns. They are not painted as other reproduction U.N.C.L.E. grips sold by others have been. They are scuff, crack and chip resistant, but if you do scrape it or drop it (which you know you are going to do when you start playing U.N.C.L.E. like you always wanted to do with a real looking U.N.C.L.E. gun) it will still be black on the booboo spot.
|
| |
|
These guns are not legal in California, Connecticut, Massachusetts, New York, Minnesota, Kansas, Wisconsin, Puerto Rico or Canada. We will not ship to addresses in those states, but we will ship to addresses in any of the free states if you have friends or relatives who live there.
This is an all metal semi-auto blank gun which fires 8mm blanks only and it cannot be made to fire real ammunition. It also comes with an orange plastic plug in the end of the barrel for safe identification as a non-gun.
|
  |
Blank Gun with Flat Grip- short, threaded barrel and flash hider
(BGFG-SB $425.00)
Flat Grip Only for P-38 Blank Gun
(BFG $150.00)
ANOTHER FIRST FROM THEUNCLEGUN.COM
Functional Steel Replica U.N.C.L.E. Magazines.
These were custom made for us by a major U.S. magazine manufacturer. They come in 15 round and 10 round versions, but both versions look exactly alike. Even though these are functional, testing them by cycling a gun’s slide by hand, we find that the 15 round version cycles most reliably when loaded only with 12 rounds. We also have these magazines in an airsoft version. The airsoft version is cosmetic only and will not hold compressed gas and they will not hold cartridges. They also have the tops partially ground down to fit the airsoft’s internals. When shipped to some states they will not have the spring intalled.
We cannot ship these to Massachusetts or Washington, DC.
We can ship only the 10 round magazines to California, Hawaii, Illinois, and New York.
Flat Grip for WWII P-38 and for Maruzen P-38 Airsoft
(P-38FG $150.00)
Rounded Grip for WWII P-38 and for Maruzen P-38 Airsoft
(P-38RG $150.00)
Plastic U.N.C.L.E. Scope and Plastic Scope Mount with Steel Thumb Screw
(Plastic scope can be lightly tightened to the scope mount with the two steel screws)
(PSSM- $275.00)
Plastic U.N.C.L.E. Scope only
(PS- $150.00)
Plastic Scope Mount only with Steel Thumb Screw
(PSM- $150.00)
Plastic and Aluminum Non-folding U.N.C.L.E. Stock with Steel Thumb Screw
(Stock does not collapse or fold, but thumb screw allows you to lock it in the grip.)
(PStock- $295.00)
Airsoft U.N.C.L.E. Gun
We make our airsoft U.N.C.L.E. guns from Maruzen P-38 airsoft pistols and we have engineered them to be able to use our open end U.N.C.L.E. flash hider and still shoot airsoft bb’s. You can also attach the U.N.C.L.E. carbine parts.
Our U.N.C.L.E. airsoft conversion process-
P-38 airsoft pistols have a plastic outside barrel and a brass inside barrel. The bb’s travel down the brass
barrel when you fire them. We cut the plastic barrel off and replace it with a short machined steel barrel
with internal threads for attaching our flash hider, silencer and extended barrel. We then cut the brass
barrel to the correct length. We work the end of the flash hider and the brass barrel so they fit with each
other and still allow the slide to work properly and the bb’s to shoot. The only downside is that cutting
the brass barrel short can make the bb’s accuracy somewhat erratic.
Next we bob the back of the magazine release to work with the grip and bob the hammer for that familiar
UNCLE gun look. We add our plastic P-38 UNCLE gun grip to the airsoft and add our open end flash hider
to complete the airsoft UNCLE gun.
Your airsoft U.N.C.L.E. gun comes with a Maruzen P-38 airsoft with converted barrel, steel open end flash
hider and plastic U.N.C.L.E. grip. It is capable of using the U.N.C.L.E. carbine parts we make.
Airsoft U.N.C.L.E. Gun with Flat Grip, Short Threaded Barrel and Flash Hider
(AG- $695.00)
Steel replica U.N.C.L.E. flash hiders as used on the TV series.
Custom machined steel thumb screws for U.N.C.L.E. scope mount and stock.
U.N.C.L.E. Silencer-black plastic with metal threads
(SIL $150.00)
|
Not allowed to own a real gun? Try our plastic copy of one of the original P-38 U.N.C.L.E. Specials used on the Man From UNCLE TV show from the 1960's. It was copied from one that was molded off the original. This piece is an exact copy of the original. You can see the serial and model numbers, the proof marks, and the grip even has the dings that the original has. The original can be seen on the CIA's website. This copy has functioning scope mount slot, functioning stock slot, and solid threaded barrel (7/16 threading, just like the original). If you are going to use a scope mount on this gun we suggest that you use our plastic one to prevent breaking the scope mount slot. Flash Hider sold separately.
Solid Plastic Cast Resin Copy of Original U.N.C.L.E. Gun
(Flash Hider sold separately.)
(PG - $195.00)
This U.N.C.L.E. gun replica is made of a durable plastic cast resin, anodized aluminum tubing, and a few metal screws. The pistol part is cast from one molded off one of the original guns used on The Man From U.N.C.L.E. TV series.
In order to hold down manufacturing costs and increase the strength of various parts we have epoxied the parts into four groups, pictured below. You can screw the barrel group into the gun barrel, slide the scope and scope mount into the mounting slots on the grip and tighten it to hold, and slide the stock into the back of the grip. All other parts are epoxied together as shown in the picture below. Your plastic U.N.C.L.E. carbine will ship in the case pictured below.
Solid Plastic Cast Resin and Aluminum Copy of Original U.N.C.L.E. Carbine.
|
|
Man From UNCLE Gun Short Threaded P-38 and Airsoft Barrel
In order to make your own replica Man From U.N.C.L.E. gun you first need a properly shortened and threaded barrel to which you can add the barrel attachments. Until now the only way to get such a barrel was to destroy the usefulness of you original WWII P-38 barrel, or pay up to $200.00 for another one, assuming you could find one to buy, and pay a gunsmith up to another $200.00 to properly cut and thread your barrel. That is no longer necessary.
Our solid plastic barrel was molded from a real WWII P-38 barrel and then cut and threaded with the 7/16 threading of the original Man From U.N.C.L.E. guns. This is made of the same tough polyurethane resin we use in all our replica UNCLE gun parts. It takes exacting detail and is black all the way through, not a painted on black.
The advantages of using this barrel:
- Cost- Your original barrel will cost much more to convert to an U.N.C.L.E. configuration than this barrel costs. And using this barrel you can leave your original barrel in it's original shooting condition.
- Versatility- Barrel changes are very quick and easy, and since this barrel will fit both your WWII P-38 and your Maruzen airsoft you can use this barrel in both guns and quickly change them back to original shooting condition. In addition, to convert your airsoft barrel requires you to permanently attach a flash hider to the barrel, which means you would not be able to fit it with other barrel attachments. This barrel gives you complete carbine capabilities.
- Realism- when using this barrel on your airsoft it will not shoot bb's. However, your gas magazine will still cycle the action, giving you recoil and the closest sound you can get to the original TV shooting sound effect.
- Safety- Most importantly, with this barrel in your WWII P-38 you will not be able to chamber a round. A real barrel that has been shortened and threaded the way the originals were is a very grave safety hazard. Since the flash hider blocks the bullet's path, if you were to accidentally chamber a round and pull the trigger, the gun could explode causing possible serious injury or even death. This cannot happen with our barrel because it is solid and will not accept a round.
Picture of a P-38 airsoft pistol with full carbine conversion using our plastic
Short Threaded P-38 and Airsoft Barrel and Plastic Extended Magazine.
|
|
Plastic Extended Magazines
These magazines are solid polyurethane resin and are black all the way through, not a painted on black finish. We make them to fit our blank gun, the Maruzen p-38 airsoft, and real P-38s. Great for those who cannot find real extended magazines the proper size and look, or for those who live in states that do not allow real high capacity magazines.
Here’s a picture of a blank gun that has our plastic magazine attached.
|
|
|
Never before available – accurate reproduction leather U.N.C.L.E. shoulder holster.
|
|
|
|
Two New Accurate
Reproduction U.N.C.L.E. Shoulder Holsters
Three years in
development, these holsters are the most accurate reproduction U.N.C.L.E.
shoulder holsters ever made. We put hundreds of hours into collecting and
analyzing video and still shots, and taking measurements of every conceivable
aspect. We made over a dozen prototype holsters working out every detail of the
design before finalizing the pattern used to cut the leather. These are so
accurate that the man who owns the original holster used by David McCallum now
uses one of our holsters with one of the original U.N.C.L.E. guns he owns, as
does another owner of one of the other original U.N.C.L.E. guns.
We have made the new
holster with the same weight leather and the same idiosyncrasies as the
original. We have also made them in two versions and two prices. One version
is just like David McCallum’s (Illya) holster, which includes the extra
stitching on the underarm part, as well as the extra layer of leather the extra
stitching is for. The other version is cut from the same pattern, but it does
not have the extra layer of leather or the extra stitching. The underarm part
of the original holster was cut apart to enlarge it and change the position of
the gun. A second layer of leather was added for support to the back of where
the stitching is located, and the stitching is what holds it all together.
These holsters are in limited supply.
 
Without Extra Stitching With Extra Stitching
Two Views of The Version Without Extra Stitching
 
Front View of Holster
David McCallum With Original Me With Our Holster
 
Our Holster With
Extra Stitching Our Holster Without Extra Stitching
 
|
|
|
|
|
|
|
|
|
|
|
|
AND NOW FOR ANOTHER FIRST
The U.N.C.L.E. Special Utility Pack |
|
  |
As seen in the first season “The Yellow Scarf Affair” episode. |
    |
This Utility Pack is made of high grade hand worked leather and has 3 holster clips on the back for attaching the pack to your belt or waistband.
U.N.C.L.E. Utility Pack
(UUP $125.00)
Utility Pack Does NOT come with gun accessories pictured.
|
|
|
Also available for your blank gun are 8mm blanks. These are VERY loud and should not be used without ear protection. They are sold in packs of 10 rounds each, but must be ordered and shipped separately from the blank guns, so please order these after you have finished ordering blank guns.
|
 |
|
8mm Blanks – 10 Pack
(B-10 - $4.50)
_________________________________________________________________________________________
_________________________________________________________________________________________
|
|
This THRUSH assault rifle is a 1/6 scale piece I made a few years ago. I will be reworking this design at some point and offering copies for sale- price to be determined once I have production copies ready for sale.
|
 |
|
|
This is one of the Thrush rifles used in the U.N.C.L.E. TV series. The picture was copied from the CIA’s website.
|
|
 |
|
|
This is a 1/6 scale U.N.C.L.E. carbine I made of sterling silver and steel. I am reworking this design as well to make the detail even more accurate. Copies of this will also be for sale- price also to be determined.
|
 |
|
|
The following four pictures are of a 1/6 scale U.N.C.L.E. Special I made in 14K gold. I am improving this design as well. It will include your choice S or K initial and can be made as a pendant for a necklace or as a lapel pin.
|
 |
|
 |
|
 |
|
 |
|
|
This is a functional .45 version of the U.N.C.L.E. carbine I am working on. It will eventually have U.N.C.L.E. type grips. You’ll notice in the first episode of The Man From U.N.C.L.E. that Illya Kuryakin was equipped with a Colt .45 as his U.N.C.L.E. sidearm.
|
 |
|
|
This is my collection of toy U.N.C.L.E. guns.
|
 |
The following was taken from the December 1965 issue of Popular Science.
|
 |
These two were taken from the CIA’s website. And your parents told you that U.N.C.L.E. wasn’t real.
|
 |
|
 |
|
|
Visit Vienna Conspiracy, String Quartet
Visit Samaritan Arts for gold jewelry, wedding rings, and more
Samaritan Arts
2427 I-40 W
Amarillo, TX 79109
Info@TheUncleGun.com
1-800-658-6148 |
